Chinese  |  Engish
Surface thickness gauge, roughness comparison plate, coating thickness gauge

Surface thickness gauge

International Roughness comparison plate

International standard steel cleaning pictures

Salt contamination meter

1.Can measure the thickness of the material from both sides , especially match with TESTEX measuring tape will get a better effect
2.Measure the height of the surface profile
3.Inch / metric two typesbr /> 4.Accord with ASTMD4417 method C
Measuring range:
0~1000um
0~50mil/thou

1.Made of high-purity nickel plating specific carbon steel
2.Comply with ISO08503 standards requirements, General, coarse levels
3.Reach sandblasting, shot peening to clear the surface of five Sa rank
Standard:
ISO8503 Standard

1.This book uses 12 languages, 28 color photographs, offers four kinds of rust degree reference, as well as methods to rust and surface treatment of stainless steel substrate preparation methods include surface cleanliness meet the following criteria.
Specifications:
Sa21 / 2 and Sa3 level of certification
Bs British Rust Standards
CEPE European Rust Standards
SSPC USA Rust Standards
ISO12944

1.Measurement and show salt content
2.Determine whether adequate cleaning
3.Show corrosive salt accumulation
4.Increase coating life
5.Provide aluminum box
Range :
0.1~20ug/cm^2
Precision:±1%

Ultrasonic thickness gauge

Leveraged coating thickness gauge

456 Electronic coating thickness gauges

345 Electronic coating thickness gauges

1.Simple operation
2.LCD thickness value and the speed of sound
3.Different materials can be measured speed of sound
4.Design precision, small size, light weight
5.Inch / Metric swap

Measuring range:
2~200mm

1.Thickness measurement of coating on steel substrate
2.Ideal for measuring dangerous places
3.One-handed operation
4.Metric / imperial two kinds

Measuring range:
Six-sided
0~6mm
0~250mil/thou
Precision:±2.5

1.Most popular coating thickness gauge
2.Select the matching measuring instrument and probe to meet your needs
3.The new combination of automatic identification matrix probe can be used for steel and non-steel substrates measuring
4.Flexible separate probe (standard) and the overall probe (basic)
6.Standard additions has a led display (LED) buzzer audible signal and determine effective reading, backlight display and data output functions
7.Suitable for steel and non-steel matrix composite probes:
FNF10-1500um(0-60min/thou)
8.Applicable to the steel substrate probe:lF10-1500um (0-60mil/thou)
lF20-5mm(0-200mil/thou)
9.Probes for non-steel substrate probe:N10-1000um(0-40mil/thou)

 

Copyright © 上海良时智能科技股份有限公司
沪ICP备05016443号-3
webmaster@shliangshi.com86-021-51035200 400-021-5767

沪公网安备 31012002002170号